Non-standard products
HS Portal scantling
Technical data
| material | spruce | |
| characteristics | multi-ply scantling produced from finger-jointed layers 6 000 m long | |
| dimensions | on order | |
| humidity | 12 % +2, -3 % maximum difference in the humidity of layers 3% |
|
| gluing | PVAc glue D – 4 according to DIN EN 204 (STN EN 204) | |
| texture | outer layer - radial/semi-radial timber 300mm+ middle layer – semi-radial and semi-tangencial timber |
|
| finger-joints | in layers A and C is 300+ mm length allowed in center layer B is 200+mm length allowed |
|
| growth rings | maximum vertical distance 6 mm widths ratio of growth rings in finger-jointed layers is a maximum of 1:1,5 ( does not apply for layer B) |
|
| glued joints | unglued joints are not allowed glued gap allowed up to 0,1 mm strength of finger-joint - 75 % of fold in the wood |
Rustic window scantling
Technical data
| material | spruce | |
| characteristics | two or three ply scantling produced from finger-jointed layers 6 000 mm long | |
| dimensions | 48 mm x 65/75/86/115/125/145 mm 65 mm x 65/75 mm |
|
| humidity | 12 % +2, -3 % maximum difference in the humidity of layers 3% |
|
| gluing | PVAc glue D – 4 according to DIN EN 204 (STN EN 204) |
|
| texture | layer B –semi-radial and semi-tangencial timber layer C - radial –semi-radial timber |
|
| finger-joints | 200+mm length allowed | |
| growth rings | maximum vertical distance 6 mm widths ratio of growth rings in finger-jointed layers is a maximum of 1:1,5 (does not apply for layer B) |
|
| glued joints | unglued joints are not allowed glued gap allowed up to 0,1 mm strength of finger-joint - 75 % of fold in the wood |
|
Quality conditions
| Quality A | surface of layers A and bottom of layers C practically without defect sides of scantling - knots allowed 1 piece per 1 m up to 6 mm and pitch canals up to 30 mm 3 pieces/1 m distance of growth rings maximum 6 mm |
|
| Quality C |
blue colored wood allowed, 200 mm+ |